Automatic Flow Vibration Polisher Machine BZ-1A

The flow-type finishing machine employs the centrifugal force generated by the high-speed operation of the bottom rotating disk to cause strong friction between the workpiece and the abrasive under the action of the fixed groove, resulting in a spiral eddy current movement that causes the workpiece and abrasive to rotate at high speeds and spiral flip.

Products Description

This machine consists primarily of a grinding tank, vibrating screen, machine base, feeding mechanism, and electrical cabinet.

Grinding groove: Made up of a bottom spinning disc and a polygonal fixed grinding groove. The grinding tank is lined with a thick layer of high-strength, high-wear-resistant polyurethane (PU), ensuring long-term operation. The grinding tank is integrated with the motor and may be automatically turned backward 90° by pressing the button to discharge the abrasive and workpiece.
The vibrating screen is made of steel plates that have been soldered together. The screen is fitted with a steel grid. The screen may be updated as needed based on the size of the workpiece and abrasive to produce the effect of automated material distribution.
Machine foundation is built of welded square steel.
Automatic turning mechanism: Using a motor transmission device, the abrasives and workpieces in the grinding tank are automatically poured into the vibration screening via the control button for sorting; it is manually reset after the sorting is complete.
Electrical cabinet: made up of individual closed boxes. The panel’s indicator buttons allow you to control the entire machine’s functioning.